ページ 11

Cobra DMCが発表しました

未読記事Posted: 2014年9月15日(月) 17:19
by ndssell.com
先日、COBRA ODE公式サイトによると、Cobra DMCが発表しました。 :D :D
発表の内容は下記のとおりです。

the new DMC module for PHAT PATA, SATA PHAT, 2k, 2k5 and 3k consoles which enables use of all versions of Cobra ODE (3.xx/4.xx and 5.xx) on 4.60 OFW. A swap disc is required in line with current usage of Cobra ODE on OFW 4,60 and 4k consoles.

The DMC module has an Actel FPGA on board which controls the optical lens' units disc eject motor, thus enabling us to insert and remove discs without detection by the drive controller. The onboard FPGA is linked to a USB PHY which enables full reprogramming of the FPGA at any time via USB connected to your PC.

The Cobra DMC connects to the Cobra ODE (all models) via the JTAG 24 pin FFC port on the Cobra ODE and the "main" port on the Cobra DMC. All necessary cables are included.

The Cobra DMC can be mounted adjacent to the optical drive of your PS3. The module then connects to the eject motor inside your drive, without soldering via FFC cables.